Unity Ads ROAS campaigns: setup, targets, and best practices

Nov 19, 2026|5 Min

Daniel Godley - Unity

Senior Content Marketing Manager

Illustration of a phone with columns of blue dots and a rising green stepped line, linked by a dotted path to a target of concentric blue rings.

A ROAS (return on ad spend) campaign is a campaign that bids on every impression against the revenue it predicts from each player, so your budget follows the players most likely to pay or watch ads. Instead of paying a flat price for every install, as in a CPI (cost per install) campaign, you set the return you want and let Unity Vector, the AI foundation of Unity Ads, decide the bid price. Players predicted to bring in more revenue get a higher bid, while those predicted to bring in less get a lower one. Spend should move toward predicted value on its own.

This e-book will empower you with the best practices to pick, set up, and win with your Unity Ads ROAS campaigns.

The numbers in this e-book are guidelines, not rules. Let your own performance data set the final structure.

Key takeaways

  1. Start running Unity Ads ROAS campaigns from D0 (day 0). You no longer need a CPI campaign first.
  2. Match your campaign mix to how your game makes money. Start with a short window, then add longer windows once learning clears.
  3. Run D7 (day 7) and D28 (day 28) together. They find different players.
  4. Complete your data setup before launch. Unity Vector optimizes what it can see, so complete your data setup before you launch.
  5. Set the campaign budget to unlimited and control the pace of spend with the daily cap.
  6. Lower your ROAS target if your campaigns aren’t capping. Raise your daily cap if your campaigns are reaching their cap.

ROAS and CPI campaigns: goals and use cases

ROAS and CPI campaign types buy different things and should be used for different goals.

CPI campaigns buy volume

The goal of a CPI campaign is install volume. You decide how much you're willing to pay for an install, and the campaign bids at that price, up to your maximum. Running a CPI campaign makes sense when you're getting a game in front of players for the first time, testing a new market, or scale volume quickly. It's easy to control because you set the price.

ROAS campaigns buy revenue

The goal of a ROAS campaign is revenue. You set a target revenue return for the window you want it in, such as a return by D7, and the campaign bids dynamically on every impression against that target. It looks for players predicted to spend on in-app purchases, watch ads, or a mix of both.

The three phases of a ROAS campaign

Every ROAS campaign moves through three phases:

  1. Setup: Set your window, optimization type, ROAS target, budget, and creatives.
  2. Learning: The model collects enough data to start optimizing. Keep changes to a minimum during this phase.
  3. Live: The campaign optimizes toward your target, and the focus shifts to scaling what works.

The learning phase ends when the model has enough data for your optimization type:

Optimization type

Ad revenue

What it takes to exit learning in Unity Ads

1,000 installs that earned ad revenue.

IAP

What it takes to exit learning in Unity Ads

75 players who bought within 7 days.

Hybrid

What it takes to exit learning in Unity Ads

1,000 installs that earned ad revenue, plus 35 buyers.

In Unity Ads, learning is a status tracked by Game ID and optimization type. Once you clear learning for an optimization type for a shorter window, any window you add later for that type starts with what’s already been learned.

For example, if you first run a D7 Hybrid ROAS campaign, when you add a D28 Hybrid ROAS campaign later, it builds on the learnings from the D7 campaign you already launched.

For further learning phase and ROAS optimization guidance, check out this guide.

How Unity Vector powers Unity Ads ROAS campaigns

Unity Vector uses data from across the Unity ecosystem to predict which players are likely to bring value to your game, then bids on that prediction. No single signal tells Vector which players will pay back, so it combines five kinds of context:

  • Player behavior
  • Game mechanics
  • Acquisition source
  • Responses to Unity Ads
  • IAP, ad watches, or both

The more of these signals Vector can observe, the better it can optimize toward what you care about.

No CPI campaign needed to learn

Unity Vector enabled several new improvements for Unity Ads ROAS campaigns. Now you can create a ROAS campaign on day one and let it pass through learning. It starts optimizing toward your goal once it's live.

Give Vector the data it needs

Each integration below adds a signal for Unity Vector to optimize with, and more complete signals support clearer decisions and better optimization over time. Work through the following steps before launch.

What to do

Configure your MMP

Why it matters

Connects acquisition to player behavior and outcomes.

Extend MMP postback and set the window to lifetime

Why it matters

Captures longer-term player value.

Why it matters

Strengthens identity and session context.

Why it matters

Helps validate Android purchase signals.

Why it matters

Adds deeper context on in-session engagement.

Enable Diagnostics

Why it matters

Adds game and runtime context.

Why it matters

Strengthens purchase validation and revenue visibility.

Why it matters

Makes eligible first-party data available to Vector. Applies to games built with Unity.

For step-by-step instructions, use the Unity Vector data health checklist.

How to pick the right Unity Ads ROAS campaign for your game

Picking a ROAS campaign means making two choices: a targeting window (D0, D7, or D28) and an optimization type (Ad revenue, IAP, or Hybrid). Your monetization model decides the right combination, and for most games that means running more than one.

Targeting windows: D0, D7, and D28

A targeting window is the period used to measure revenue. Every window starts at install, so each player's revenue counts from the day they installed your game.

Window
D0
Covers

First 24 hours

Role

Finds players who monetize on day one, typically with ads.

Limitation

Sees only the first day, so it misses value that builds later.

D7
Covers

First 8 days

Role

Finds early payers and ad watchers.

Limitation

On its own, it can leave value on the table when revenue builds after week one.

D28
Covers

First 29 days

Role

Finds players whose value builds beyond the first week.

Limitation

Has a longer learning phase and needs more time before you can judge it.

Unity Ads ROAS campaign optimization types

The targeting window sets when a campaign’s ROAS is expected to be paid back by. The optimization type is the kind of revenue it optimizes for.

Type
Ad revenue
Optimizes for

Players who monetize by watching ads.

Fits games that

Earn their revenue from ads.

IAP

Optimizes for

Players who monetize by buying in-app purchases.

Fits games that

Earn their revenue from purchases.

Hybrid
Optimizes for
Both players who watch ads and players who buy IAP.

Fits games that

Earn meaningful revenue from both.
How to pick the right combination of targeting windows and optimization types

Your monetization model should decide the combination of targeting window and optimization type you run. Games within a genre typically monetize using similar strategies, so it can be a useful shorthand for picking the correct campaign mix.

Monetization model

IAP only

Popular genres

MMORPG, 4X strategy, card battlers

Campaigns to run

  • D7 IAP
  • D28 IAP
Hybrid, IAP-heavy

Popular genres

Strategy, RPG, idle RPG, match-3 with meta progression, simulation

Campaigns to run

  • D7 Hybrid
  • D7 IAP
  • D28 Hybrid
  • D28 IAP

Hybrid, ad-heavy

Popular genres

Puzzle, casual, idle, merge, tycoon, hypercasual+

Campaigns to run

  • D7 Hybrid
  • D7 Ad revenue
  • D28 Hybrid
  • D28 Ad revenue
Hybrid, IAP-heavy

Popular genres

Hypercasual, arcade, endless runner, simple puzzle

Campaigns to run

  • D0, D7, and D28 Ad revenue

How to set up your campaign for success

Set your target

The target is a return percentage by window. A lower target raises the bid, so it buys more reach.

Situation

At launch: You have historical ROAS

What to do

Start at 85–90% of historical ROAS, using the same countries and cohorts as your last 2–3 closed cohorts. If your D7 ROAS has run around 60%, start near 51–54%. A target over 90% would sit well above what the game delivers, and the campaign would struggle to spend.

At launch: You have no historical ROAS

What to do

Start with your desired ROAS KPI. Buy scale by lowering your starting target.

Ongoing

What to do

Update one target at a time per cohort. D0 every 2–3 days, D7 every 7–9 days, D28 every 14–30 days. Keep each change to a maximum of 10%.

In learning

What to do

You can lower the target. Avoid increasing it.

Set your campaign budget and daily cap

The campaign budget and daily cap settings do different jobs. The campaign budget is your total spend ceiling. Set it to unlimited, because a low budget suppresses delivery before you reach your cap. The daily cap is your pacing lever. It controls spend over a 7-day rolling window, so a day slightly above or below the cap evens out across the week. Set it per campaign, per country, or per country group.

For the daily cap, start from the minimum your dashboard recommends, which is calculated from the countries you target. To exit learning faster, size the cap to the data the model needs:

  • IAP and Hybrid: enough to acquire about 10 purchasers a day. For example, at a 10% payer rate that's about 100 installs a day, and at a $6 CPI about $600 a day.
  • Ad revenue and Hybrid: enough for about 200 installs a day. For example, at a $2.50 CPI that's about $500 a day.

Your own numbers will depend on your countries, CPI, and payer rate.

Do's and don'ts while you're in learning

Unity Vector needs stable conditions to learn, so the fewer changes you make, the better.

Do

Minimize target changes until the campaign status moves from Learning to Live.

Don't

Don't increase the target. It can limit your scale while in learning.

Raise the daily cap or lower the target only if volume is low (below 65% daily cap utilization) or learning takes too long (more than 14 days).

Don't

Don't make unnecessary target changes. They can cause performance fluctuations.

Add countries as needed. Adding a country expands your targeting.

Don't

Don't set your budget below the recommended minimum. It can limit exploration.

After learning: capping or not capping

Once a campaign is live, the first thing to check is whether it reaches its daily cap.

Not capping: lower your target

If your campaign isn't reaching its cap, lower your ROAS target. A lower target means a higher bid, which gets you more volume and reach, and lets the model learn across a broader audience. Drop it by up to 10%, once per cohort, until the campaign caps.

Capping and quality holds: raise your daily cap

If your campaign is capping and your ROAS is holding up, that's a good sign. It's working, and you're probably leaving volume on the table. Raise your daily cap, but do it in steps of 10–15%. Sudden jumps can cause performance to fluctuate.

Launch best practices for Unity Ads ROAS campaigns

  • Launch your shortest window first. Add the next window once learning clears. A game running D7 and D28 launches D7, then adds D28 after D7 exits learning.
  • Run your campaigns first in the US, Tier 1, and Tier 2 countries that you already know perform well. Don't launch every country at once.
  • Give the US its own campaign with a single-country daily cap and use only creatives proven in the US. Budget $50–100 per live creative pack.
  • Start with other Tier 1 countries (CA, GB, JP) using their own campaign, grouping 3–5 countries that share a creative language. Budget $50–100 per creative pack, per country.
  • Give Tier 2 and 3 countries (IN, ID, BR, and others) their own grouped campaign. Group them by creative language first, and then by similar performance.

D28 launch best practices

  • Run your D7 campaigns first and complete learning, so D28 launches already in optimization mode.
  • Set the D28 target at 85–90% of the D28 ROAS you've observed from your D7 campaigns.
  • Launch the US and your top-performing Tier 1 countries together.
  • In days 0–30, monitor budget utilization only. If it doesn't reach 65%, lower the target.
  • Run at least 60 days before making major changes. Each D28 cohort takes about a month, so 60 days gives you two full cohorts to judge. The most expensive mistake is cutting a D28 campaign in week two because early ROAS can look low.
D28 campaign launch budget recommendations

After the initial learning phase, D28 ROAS campaigns have budget recommendations beyond the standard launch settings. Launch D28 only after your D7 campaigns have exited learning.

Countries
US

D28 Ad revenue ROAS, minimum daily budget

$1,500/day

D28 Hybrid ROAS, minimum daily budget

$2,000/day

D28 IAP ROAS, minimum daily budget

$2,000/day

Tier 1 (per country)

D28 Ad revenue ROAS, minimum daily budget

$500/day

D28 Hybrid ROAS, minimum daily budget

$500/day

D28 IAP ROAS, minimum daily budget

$500/day

Tier 2 and 3 (grouped)

D28 Ad revenue ROAS, minimum daily budget

$1,000/day

D28 Hybrid ROAS, minimum daily budget

$2,000/day

D28 IAP ROAS, minimum daily budget

$2,000/day

Creative best practices

Stronger creatives help you win more auctions without raising your bid, so creative volume, variety, and rotation deserve as much attention as your target.

  • Start every campaign with eight creative packs. Once they reach 5,000-10,000 starts, add four to six new ones, and build up gradually to around 30.
  • Mix up your formats. Run video-only packs, video with a playable, and standalone playables, in different lengths (under 30 seconds and 30–60 seconds) and in both orientations. That way you reach as many players as possible.
  • Upload new packs every week to keep things fresh and prevent fatigue, and build on what's already working by trying a new orientation, a different length, or a new theme on your best performers. When you add packs, keep fewer than three in learning at a time, so each one gets a fair chance to explore.
  • Look at your packs by share of impressions roughly every two weeks. Remove the ones below 10%, but never more than 20% of your packs in total. A quiet creative isn't hurting your campaign, so only remove one when you need room for something new.
  • Plan for about $50–100 of budget for each live pack, depending on the countries you target. The more packs you run, the more budget you'll need to give each of them a fair chance.

For more creative best practices, take a look at Unity’s guide to building winning creatives.

Get personalized ROAS recommendations

Don’t miss out on tailored guidance built around your own campaigns. Opt in to Unity’s growth insights to receive recommendations such as budget cap alerts and creative best practices based on how your games perform. Sign up here.

If you’re looking for even more insights now on how to set up and run a Unity Ads campaign, check out our complete best practices guide on how to grow with Unity Ads.

Disclaimer: The recommendations in this guide are for informational purposes only and may not be incorporated into any contract. No purchasing decisions should be made based on them. Unity isn't committing to deliver any functionality, features or code, and the development, timing and release of all products, functionality and features are at Unity's sole discretion and subject to change.

Hit your ROAS targets

Feature image: “Illustration of a phone with columns of blue dots and a rising green stepped line, linked by a dotted path to a target of concentric blue rings”. Image generated by Anthropic, Claude (Sonnet 5.5). Date: November 18, 2026